|
SECTION
10 44 33
(1995 - 10520)
PART 1: GENERAL
1.01 WORK INCLUDED
A. Fire Extinguishers
B. Cabinets
C. Accessories
1.02 RELATED WORK
A. Section 09 90 00 - Field Painting
B. Section 21 13 00 - Fire Sprinkler Systems
C. Section 21 12 00 - Standpipe and Hose Systems
1.03 REFERENCES
A. NFPA1 0-Portable Fire Extinguishers
B. UBC 43-6 (ASTM E814-83) - Fire rated cabinets
fabricated in accordance to measure, restore, perform.
C. Americans with Disabilities Act 1990- Maximum 4
cabinet projection for corridors.
1.04 QUALITY ASSURANCE
A. Conform to NFPA 10 requirements for portable fire
extinguishers.
B. Provide fire extinguishers, cabinets and
accessories by a single manufacturer.
C. Conform to UBC 43-6 (ASTM E814-83) for fire
resistive wall performance where necessary.
D. Conform to Americans with Disabilities Act 1990 on
maximum cabinet projection of C in corridors where necessary.
1-05 SUBMITTALS
A. Submit brochure and product data in compliance
with Section 01340.
PART 2:
PRODUCTS
2.01 ACCEPTABLE
MANUFACTURERS
A. Where shown on the drawings, provide
fire extinguishers, cabinets, accessories manufactured by J.L. Industries, Inc.,
4450 West 78th Street Circle, Bloomington, MN 55435, (952) 835-6850, Fax: (952)
835-2218
2.02 FIRE
EXTINGUISHERS
A. Water Type: J. L. Industries Grenadier
P
B. Dry Chemical Type: J. L. Industries
Cosmic or Galaxy Series
C. Carbon Dioxide Type: J. L. Industries
Sentinel Series.
2.03 FIRE EXTINGUISHER
CABINETS
A. Where indicated on drawings, provide
J.L's ________ Series, model number _______ _______ door. Door and trim to be
fabricated from (cold-rolled steel, aluminum, and stainless steel). Color
anodized aluminum, special painted surfaces and graphics as
indicated.
B. Provide cabinets with fire-rated
option, if applicable.
2.04
ACCESSORIES
A. Fire Blankets and Cabinets
B. Extinguisher Brackets
C. Cabinet
Alarms
PART 3:
EXECUTION
3.01
INSTALLATION
A. Install items included in this section
in locations and at mounting heights indicated, or if not indicated, at heights
to comply with applicable regulations of goveming authorities.
1. Prepare recesses in walls for fire
extinguisher cabinets as required by type and size of cabinet and style of trim
and to comply with manufacturers instructions.
2. Securely fasten mounting brackets and
fire extinguisher cabinets to structure, square and plumb, to comply with
manufacturer’s instructions.
|