Part 1 - General

1.01 Description

1. Related work specified elsewhere: (Delete if mats are not recessed or adhesive bonded).

   1. Cast-in place concrete. Section 03 30 00.

   2. Metal Fabrications: Section 05 50 00. Delete if recess frames are not fabricated or furnished under Metal Fabrications Section.

   3. Terazzo: Section 09 30 00

2. Work furnished but not installed: Recessed frames and anchors. (Delete if recessed frames not used.)

1.02 Quality Assurance

1. Applicator Qualifications: acceptable to mat manufacturer.

1.03 Submittals

1. Samples: Two 12 in. x 12 in. (305mm x 305mm) pieces of each type and color of mat specified. (Delete if not required.)

2. Shop drawings: Details or recessed frame installation.

3. Manufacturer's literature: Manufacturer's recommended installation and maintenance instructions.

4. Certificates: Manufacturer's certification that materials meet specification requirements.

5. Extra stock: _________ of each color, type, and size of in-fill.

Part 2: Products

2.01 Manufacturer

1. J.L. Industries, Inc.4450 West 78th Street Circle, Bloomington, MN 55435 (952)835-6850

2.02 Materials

1. Tread: See models.

2. Tread Finish : _________.

3. Tread In-fill : _________.

4. Frame : _________.

Part 3: Execution

3.01 Inspection

1. Examine surfaces scheduled to receive mats for deviations beyond allowable tolerances.

2. Check that dimensions of completed recesses conform to mat sizes.

3. Do not begin work until unsatisfactory conditions are corrected.

3.02 Installation

1. Install mat in single piece, or multiple pieces as size dictates.

2. Fit mat neatly into recess. (Delete if mats are not recessed.)

3. Lay mat free where indicated. (Delete if mats are not recessed.)

3.03 Adjust and Clean

1. Move mat to correctly align edges.

2. Leave mat in clean condition.

3. Remove scraps from project site.