SECTION 08 31 16
(1995 - 08315)
PART 1: GENERAL
1.01 RELATED
DOCUMENTS
A. Conditions of the Contract
and portions of Division One of this Project Manual apply to this Section as
though repeated herein.
1.02 SUMMARY
Select one or more of the following subparagraphs as required by the
Project.
A. Section Includes:
1. Aluminum Angle [Single] [Double] Floor
Door.
2. Aluminum Gutter [Single] [Double] Floor
Door.
3. Aluminum Recessed [Single] [Double] Floor
Door.
1.03 SUBMITTALS
A. Product Data: For each type of floor
door indicated. Include manufacturer's model number and accessories and
requirements for roughing-in dimensions.
1.04 DELIVERY, STORAGE AND HANDLING
A. Packing, Shipping, Handling and Unloading: Deliver floor door as a
factory assembled unit in manufacturer’s original packaging.
B. Store
materials in a dry, protected, well-vented area. The contractor shall
thoroughly inspect product upon receipt and report damaged material immediately
to delivering carrier and note such damage on the carrier’s freight bill of
lading.
PART 2: PRODUCTS
2.01
MANUFACTURER
A. J L
Industries, Incorporated
4450 West 78th Street
Circle
Bloomington, MN 55435
Telephone: (952) 835-6850/(800)
554-6077
FAX: (952) 837-1222
WEB: JLindustries.com
2.02 MANUFACTURED
UNITS
A. Aluminum Angle Floor
Door.
Select one or more of the following for each aluminum angle floor door
size. If more than one size is required for the project, identify each type on a
schedule located on the drawings and identify each type in the specification
section. The first 8 options are for single door units, the next 4 options are
for double door units.
1. Model: AAF-2424S; 23 inches
by 23 inches clear opening, single door.
2. Model: AAF-2436S; 23 inches
by 35 inches clear opening, single door.
3. Model: AAF-3030S; 29 inches
by 29 inches clear opening, single door.
4. Model: AAF-3036S; 29 inches
by 35 inches clear opening, single door.
5. Model: AAF-3636S; 35 inches
by 35 inches clear opening, single door.
6. Model: AAF-3048S; 29 inches
by 47 inches clear opening, single door.
7. Model: AAF-3648S; 35 inches
by 47 inches clear opening, single door.
8. Model: AAF-4242S; 41 inches
by 41 inches clear opening, single door.
9. Model: AAF-4848D; 47 inches
by 47 inches clear opening, double door.
10. Model: AAF-4860D; 47 inches by
59 inches clear opening, double door.
11. Model: AAF-4872D; 47 inches by
71 inches clear opening, double door.
12. Model: AAF-6060D; 59 inches by
59 inches clear opening, double door.
13. Characteristics:
a.
Door Frames: Extruded aluminum.
b.
Door: 1/4 inch diamond plate aluminum.
c.
Hinges: Stainless steel.
d.
Fasteners: Tamper proof stainless steel bolts.
e.
Hardware: Stainless steel slam locks, gas assist operators, hold open arm, and
bituminous coating.
f.
Live Load: 300 psf.
B. Aluminum Gutter Floor
Door.
Select one or more of the following for each aluminum gutter floor door
size. If more than one size is required for the project, identify each type on a
schedule located on the drawings and identify each type in the specification
section. The first 8 options are for single door units, the next 4 options are
for double door units.
1. Model: AGF-2424S; 20-1/2
inches by 20-1/2 inches clear opening, single door.
2. Model: AGF-2436S; 20-1/2
inches by 32-1/2 inches clear opening, single door.
3. Model: AGF-3030S; 26-1/2
inches by 26-1/2 inches clear opening, single door.
4. Model: AGF-3036S; 26-1/2
inches by 32-1/2 inches clear opening, single door.
5. Model: AGF-3636S; 32-1/2
inches by 32-1/2 inches clear opening, single door.
6. Model: AGF-3048S; 26-1/2
inches by 44-1/2 inches clear opening, single door.
7. Model: AGF-3648S; 32-1/2
inches by 44-1/2 inches clear opening, single door.
8. Model: AGF-4242S; 38-1/2
inches by 38-1/2 inches clear opening, single door.
9. Model: AGF-4848D; 44-1/2
inches by 44-1/2 inches clear opening, double door.
10. Model: AGF-4860D; 44-1/2
inches by 56-1/2 inches clear opening, double door.
11. Model: AGF-4872D; 44-1/2
inches by 68-1/2 inches clear opening, double door.
12. Model: AGF-6060D; 56-1/2
inches by 56-1/2 inches clear opening, double door.
13. Characteristics:
a.
Door Frames: Extruded aluminum.
b.
Door: 1/4 inch diamond plate aluminum.
c.
Hinges: Stainless steel.
d.
Gutter: Equipped with 1-1/2 inch FPT drain coupling.
e.
Fasteners: Tamper proof stainless steel bolts.
f.
Hardware: Stainless steel slam locks, gas assist operators, hold open arm, and
bituminous coating.
g.
Live Load: 300 psf.
C. Aluminum Recessed Floor
Door.
Select one or more of the following for each aluminum angle floor door
size. If more than one size is required for the project, identify each type on a
schedule located on the drawings and identify each type in the specification
section. The first 5 options are for single door units, the next 4 options are
for double door units. These units are designed to accept carpet or composition
material.
1. Model: RFD-1; 24 inches by 24
inches clear opening, single door.
2. Model: RFD-2; 30 inches by 30
inches clear opening, single door.
3. Model: RFD-3; 30 inches by 36
inches clear opening, single door.
4. Model: RFD-4; 36 inches by 36
inches clear opening, single door.
5. Model: RFD-5; 42 inches by 42
inches clear opening, single door.
6. Model: RFDD-1; 48 inches by
48 inches clear opening, single door.
7. Model: RFDD-2; 48 inches by
72 inches clear opening, single door.
8. Model: RFDD-3; 60 inches by
60 inches clear opening, single door.
9. Model: RFDD-4; 60 inches by
84 inches clear opening, double door.
13. Characteristics:
a.
Frames: 1/4 inch extruded aluminum with 1-1/8 inch anchor straps bolted to
frame.
b.
Floor Plate: 1/4 inch flat plate aluminum with 1/4 inch flat aluminum
reinforcing bars welded to plate frame.
c.
Fasteners: Tamper proof stainless steel bolts.
d.
Hardware: Heavy stamped 1/4 inch aluminum hinge, tension bars, one-point latch,
inside and outside handles, and automatic hold open with vinyl grip.
e.
Live Load: 150 psf.
PART 3: EXECUTION
3.01
EXAMINATION
A. Examine areas and conditions affecting
installation. Do not proceed with installation until unsatisfactory conditions
have been corrected.
3.02
INSTALLATION
A. Install system level and plumb, and in
accord with manufacturer’s written instructions, original design and referenced
standards.
3.03 ADJUSTING
A. Adjust system for proper operation.
Replace any parts that prevent the floor door from operating
properly.
3.04 CLEANING
A. Remove all debris caused by installation
of the floor door. Clean all exposed surfaces to as fabricated condition and
appearance.
3.05 PROTECTION
A. Provide protection of the completed
installation until completion of the project. Repair any damage at no additional
cost.
3.06 SCHEDULES
If more than one type of floor door is required, provide a schedule
similar to the following example below. Use the corresponding type designations
here and on the drawings,
A. Type
1: [Describe by model].
B. Type
2: [Describe by model].
C. Type
3: [Describe by model].
|